computer problems built a computer-UD4P Gigabyte EX58-TR3X 6GB Corsair DDR3 1600 (3×2GB) Tri-Channel Kit-ca?
can make it work on a stick of memory do I need to enable something in the bios to work triple channel or put the sticks in some niche or schedules? Who knows really appreciate help on this spec a Gigabyte EX58-DU5 Intel i7, DDR3, JIIFC, SLI, GBLAN, ATX Intel i7 920 2.66Ghz Processor LGA1366 – Stepping D0 Corsair TR3X 6GB DDR3 1600 (3×2GB) Tri-Channel Kit HDS-10003UJ 1Tb Samsung SpinPoint S-ATA II 32MB Hard 3.0GB GCZ-XNGTX275A8 Zotac 896MB nVidia GeForce GTX 275 AMP PCI-Express VGA Card
No. .. since you are using identical sticks of RAM, and the board has 6 slots for RAM, and you slots for … there should be no issue. As for the BIOS, it should already be configured by default to save all three locations, because the jury was intended to do from the outset. It's like your car does not turn on when you turn the key, because it is designed to do. The first thing that comes to mind sticks is wrong … since all producers had serious problems with their canes 2g (DDR2 mostly) not so long. Assuming your operating system 64 bit is already installed … DXDIAG run and read it carefully. It should tell you if all your RAM slots work … and if they are, the amount each stick is recording. You can also check through System Properties. Oh, do yourself a favor … $ 600 Do NOT overclock your RAM. If you do, you could fry your processor, since the memory controller on the CPU, and it can not handle a higher voltage to 1.6V. I also see if I could resume for the 280 if I were you, but I'm … is also assuming I use a graphics card nVidia. Good Luck!
7Ball 6 Space ATA Effects/Amp Road Rack Flight Case w/ Accessory Bags
